This kit allows for a quick and simple conversion from the standard 2.7mm max airflow down to a much more restricted 1.8mm.
Included in this kit is:
1.8mm Deck with Positive post fitted
MTL Airflow ring offering 6 airflow options: 0.8, 1.0, 1.2, 1.4, 1.6 & 1.8mm
Undo the positive screw on the base of the atomiser.
Pull the fitted deck straight up and out.
Ensure small Oring is located under the PEEK insulator disk
Push the new MTL deck into position
Gently screw the positive screw on the base of the atomiser up.
Check the newly fitted deck does not wobble up or down or from side to side. If it does press it down a little more and gently tighten the screw on the base again.
Swap out airflow ring.
Enjoy your vape.