Reaper V3 2.7mm Conversion
This kit allows for a quick and simple conversion from the MTL 1.8mm max airflow to 2.7mm.
Included in this kit is:
2.7mm Deck with Positive post fitted
Airflow ring offering 6 airflow options: 1, 1.2, 1.5, 2.0, 2.5 & 2.7mm
Undo the positive screw on the base of the atomiser.
Pull the fitted deck straight up and out.
Ensure small Oring is located under the PEEK insulator disk
Push the new MTL deck into position
Gently screw the positive screw on the base of the atomiser up.
Check the newly fitted deck does not wobble up or down or from side to side. If it does press it down a little more and gently tighten the screw on the base again.
Swap out airflow ring.
Enjoy your vape.